Cisco Training - HD TelePresence // S-CIPT2

CIPT2 Implementing Cisco Unified Communications Manager Part 2 v8.0

Latest Version:(CIPT2) v8.0

Course Description

Implementing Cisco Unified Communications Manager, Part 2 (CIPT2) v8.0 is a 5-day course that prepares you for implementing Cisco Unified Communications solution in a multisite environment. It covers globalized call routing, Cisco Service Advertisement Framework (SAF) and Call Control Discovery (CCD), tail-end hop-off (TEHO), Cisco Unified Survivable Remote Site Telephony (SRST), and mobility features such as Device Mobility and Cisco Extension Mobility. You will apply a dial plan for a multisite environment including TEHO, configure survivability for remote sites during WAN failure, and implement solutions to reduce bandwidth requirements in the IP WAN. You will also enable Call Admission Control (CAC), including Session Initiation Protocol (SIP) Preconditions and automated alternate routing (AAR).

Audience

This course is designed for Network Administrators, Network Engineers, and Systems Engineers and anyone who has their CCNA Voice Certification and/or is working towards their CCNP Voice Certification

Prerequisites

​Before taking this course, students should have working knowledge  of converged voice and data networks,  MGCP, SIP, and H.323 protocols and their implementation on Cisco IOS gateways ,  the  ability to configure and operate Cisco routers and switches  and operate Cisco Unified Communications Manager in a single-site environment.
  
Students should also have successfully completed the following courses or have the equivalent experience:
CCNA210: ICND Part 1 - Mastering Critical Internetwork Technologies 
CCNA220: ICND Part 2 - Mastering Cisco Associate-Level Internetworking
ICOMM: Introducing Cisco Voice and Unified Communications Administration v8.0
CVOICE: Implementing Cisco Unified Communications Voice over IP and QOS 8.0
CIPT 1: Implementing Cisco Unified Communications Manager Part 1 v8.0

What You Will Learn

After completing this course, you will be able to:
  • Describe multisite deployment issues and solutions, and describe and configure required dial plan elements
  • Implement call-processing resiliency in remote sites by using Cisco Unified SRST, MGCP fallback, and Cisco Unified Communications Manager
  • Express in Cisco Unified SRST mode
  • Implement bandwidth management and CAC to prevent oversubscription of the IP WAN
  • Implement Device Mobility and Cisco Extension Mobility
  • Describe and implement CCD deployments

Course Outline

Module 1: Multisite Deployment Implementation
Lesson 1: Identifying Issues in a Multisite Deployment
Multisite Deployment Issues Overview
Quality Issues
Bandwidth Issues
Availability Issues
Dial Plan Issues
NAT and Security Issues
Lesson 2: Identifying Multisite Deployment Solutions
Multisite Deployment Solution Overview
QoS
Solutions to Bandwidth Limitations
Availability
Dial Plan Solutions
NAT and Security Solutions
Lesson 3: Implementing Multisite Connections
Multisite Connection Options
MGCP Gateway Implementation Review
H.323 Gateway Implementation Review
Trunk Implementation Overview
SIP Trunk Implementation
Intercluster and H.225 Trunk Implementation
Lesson 4: Implementing a Dial Plan for International Multisite Deployments
Multisite Dial Plan Overview
Implementing Site Codes for On-Net Calls
Implementing PSTN Access in Cisco IOS Gateways
Implementing Selective PSTN Breakout
Implementing PSTN Backup for On-Net Intersite Calls
Implementing TEHO
Implementing Globalized Call Routing
Considering Globalized Call-Routing Interdependencies
Module 2: Centralized Call-Processing Redundancy Implementation
Lesson 1: Examining Remote Site Redundancy Options
Remote Site Redundancy Overview
Cisco Unified SRST Operation
MGCP Fallback Operation
Cisco Unified SRST Versions and Feature Support
Dial Plan Requirements for MGCP Fallback and Cisco Unified SRST Scenarios
Lesson 2: Implementing SRST and MGCP Fallback
MGCP Fallback and Cisco Unified SRST Configuration Overview
Cisco Unified Communications Manager SRST Configuration
Cisco IOS Gateway SRST Configuration
Cisco IOS Gateway MGCP Gateway Fallback Configuration
Cisco Unified Communications Manager Dial Plan Configuration for SRST Support
Cisco IOS Gateway MGCP Fallback and Cisco Unified SRST Dial Plan Configuration
Lesson 3: Implementing Cisco Unified Communications Manager Express in SRST Mode
Cisco Unified Communications Manager Express Overview
Cisco Unified Communications Manager Express Features
General Configuration of Cisco Unified Communications Manager Express
Configuration of Cisco Unified Com
Manager Express in SRST Mode
Module 3: Bandwidth Management and CAC Implementation
Lesson 1: Managing Bandwidth
Bandwidth Management Overview
Cisco Unified Communications Manager Codec Configuration
Local Conference Bridge Implementation
Transcoder Implementation
Multicast MOH from Branch Router Flash Implementation
Lesson 2: Implementing CAC
CAC Overview
Standard Locations
RSVP-Enabled Locations
Automated Alternate Routing
SIP Preconditions
H.323 Gatekeeper CAC
Module 4: Implementation of Features and Applications for Multisite Deployments
Lesson 1: Implementing Device Mobility
Issues with Devices Roaming Between Sites
Device Mobility Overview
Device Mobility Configuration Elements
Device Mobility Operation
Device Mobility Interaction with Globalized Call Routing
Device Mobility Configuration
Lesson 2: Implementing Cisco Extension Mobility
Issues when Users Roam Between Sites
Cisco Extension Mobility Overview
Cisco Extension Mobility Configuration Elements
Cisco Extension Mobility Operation
Cisco Extension Mobility Configuration
Module 5: Call Control Discovery
Lesson 1: Implementing SAF and CCD
The lesson includes these topics:
SAF and CCD Overview
SAF Characteristics
CCD Characteristics
CCD Operation
SAF and CCD Implementation

CCD Considerations