IOS Recovery from ROMMON by Jeremy Cioara

Home > Blogs > Cisco > IOS Recovery from ROMMON by Jeremy Cioara

IOS Recovery from ROMMON by Jeremy Cioara

Like This Blog 1 Jeremy Cioara
Added by November 28, 2008

This information is here primarily for my reference at customer sites; for some odd reason, I seem to be recovering IOS images through ROMMON quite a bit lately. These are the minimum fields to get this going through TFTP rather than XModem. Hopefully you find this beneficial as well!

rommon 1 > IP_ADDRESS=192.168.1.100

rommon 2 > IP_SUBNET_MASK=255.255.255.0

rommon 3 > DEFAULT_GATEWAY=192.168.1.1

rommon 4 > TFTP_SERVER=192.168.1.50

rommon 5 > TFTP_FILE=c2600-adventerprisek9-mz.124-5a.bin

rommon 6 > tftpdnld (this command kicks off the tftp download)

Videos You May Like

A Simple Introduction to Cisco CML2

0 3877 0

Mark Jacob, Cisco Instructor, presents an introduction to Cisco Modeling Labs 2.0 or CML2.0, an upgrade to Cisco’s VIRL Personal Edition. Mark demonstrates Terminal Emulator access to console, as well as console access from within the CML2.0 product. Hello, I’m Mark Jacob, a Cisco Instructor and Network Instructor at Interface Technical Training. I’ve been using … Continue reading A Simple Introduction to Cisco CML2

Creating Dynamic DNS in Network Environments

0 641 1

This content is from our CompTIA Network + Video Certification Training Course. Start training today! In this video, CompTIA Network + instructor Rick Trader teaches how to create Dynamic DNS zones in Network Environments. Video Transcription: Now that we’ve installed DNS, we’ve created our DNS zones, the next step is now, how do we produce those … Continue reading Creating Dynamic DNS in Network Environments

Cable Testers and How to Use them in Network Environments

0 724 1

This content is from our CompTIA Network + Video Certification Training Course. Start training today! In this video, CompTIA Network + instructor Rick Trader demonstrates how to use cable testers in network environments. Let’s look at some tools that we can use to test our different cables in our environment. Cable Testers Properly Wired Connectivity … Continue reading Cable Testers and How to Use them in Network Environments

Write a Comment

See what people are saying...

    Share your thoughts...

    Please fill out the comment form below to post a reply.