Three handy alias commands – Jeremy Cioara

Home > Blogs > Cisco > Three handy alias commands – Jeremy Cioara

Three handy alias commands – Jeremy Cioara

Like This Blog 0 Jeremy Cioara
Added by December 13, 2006

From global config:

alias exec s show ip interface brief (the ol' standby)
alias exec traffic sh ip nbar protocol-discovery stats bit-rate top-n 10 (shows top 10 protocols using your interfaces)
alias exec proc show proc cpu | excl 0.00%__0.00%__0.00% (shows only processes using CPU)

Videos You May Like

A Simple Introduction to Cisco CML2

0 3703 0

Mark Jacob, Cisco Instructor, presents an introduction to Cisco Modeling Labs 2.0 or CML2.0, an upgrade to Cisco’s VIRL Personal Edition. Mark demonstrates Terminal Emulator access to console, as well as console access from within the CML2.0 product. Hello, I’m Mark Jacob, a Cisco Instructor and Network Instructor at Interface Technical Training. I’ve been using … Continue reading A Simple Introduction to Cisco CML2

How to create a Cisco IOS Banner – Login and MOTD Message of the Day

0 4242 4

In this video, Cisco CCNA instructor Mark Jacob shows how to create a Login and Message of the Day (MOTD) banners in Cisco IOS. The Banner is an interesting feature of the Cisco IOS. You could probably get by without it, but in a commercial environment you want to have it.

OSPF Adjacency Troubleshooting Solution – Getting Close to the OSPF adj

0 247 1

In this video, Cisco CCNA & CCNP instructor Mark Jacob shows how to troubleshoot OSPF Adjacency issues by showing the distance between routers with the show ip ospf neighbor command.

Write a Comment

Share your thoughts...

Please fill out the comment form below to post a reply.