Binding and Unbinding Network Services To Specific Protocols in Windows 10
Binding and Unbinding Network Services To Specific Protocols in Windows 10
If you’re like me, you have more than one network connection on your PC. For example, my desktop computer has two wired Ethernet adapters and one Wi-Fi adapter. And those are just the physical adapters… there are also virtual adapters for remote access and virtualization.
For instructor-led Windows 10 training see our class schedule.
Some of these adapters are connected to internal resources, and some to external networks. And because I test and experiment with my PC, those connections change periodically.
To optimize my protocol use, as well as force specific protocols when I need to test different connectivity options, I sometimes want to bind or unbind TCP/IP v4 or v6 to a network connection. This is how I accomplish that in Windows 10. The setting is somewhat hidden and difficult to locate, so you might want to bookmark this one.
First, fire up Control Panel. The old, classic Control Panel, not the Settings menu. I usually do this my pressing Windows + R, typing Control, and then pressing Enter.
Next click on Network and Sharing Center.
In Network and Sharing Center, in the left-hand column, click Change adapter settings. This will show you the Network Connections interface.
The option is here. But it’s hidden. To unhide it, tap the Alt key. You’ll see the menu bar unhide itself.
Now click the Advanced menu and you can select Advanced Settings. This shows you the Advanced Settings dialog.
Now, to bind or unbind protocols to services, first click the connection that you want to modify. Then, under Bindings, check or uncheck the options. Checked is bound, unchecked is unbound. As you can see, you can independently bind and unbind protocols like TCP/IPv6 and TCP/IPv4 from any registered network service. Then click OK and you’re done!
Enjoy!
Mike Danseglio – CISSP, MCSE, and CEH
Mike Danseglio teaches IT Security Training, Windows, System Center and Windows Server 2012 classes at Interface Technical Training. His classes are available in Phoenix, AZ and online with RemoteLive™.
You May Also Like
Cable Testers and How to Use them in Network Environments
0 668 1This content is from our CompTIA Network + Video Certification Training Course. Start training today! In this video, CompTIA Network + instructor Rick Trader demonstrates how to use cable testers in network environments. Let’s look at some tools that we can use to test our different cables in our environment. Cable Testers Properly Wired Connectivity … Continue reading Cable Testers and How to Use them in Network Environments
Configuring Windows Mobility Center and How to Turn it On and Off
1 1411 1Video transcription Steve Fullmer: In our Windows training courses, we often share information about the Windows 8.1 Mobility Center. Mobility Center was introduced for mobile and laptop devices in Windows 7. It’s present and somewhat enhanced in Windows 8. Since we don’t have mobile devices in our classrooms, I decided to take a little bit … Continue reading Configuring Windows Mobility Center and How to Turn it On and Off
OSPF Adjacency Troubleshooting Solution – Getting Close to the OSPF adj
0 247 1In this video, Cisco CCNA & CCNP instructor Mark Jacob shows how to troubleshoot OSPF Adjacency issues by showing the distance between routers with the show ip ospf neighbor command.